- Coaxial Heat Exchanger
- Shell & Pipe Heat Exchanger
- Evaporation Condenser
- Micro-channel Series >
- Micro-chemical Reactor
- Micro Cooling System
- Coil-in-shell Heat Exchanger
- Shell & Tube Heat Exchanger
- Accessories >
Micro-channel heat exchanger
Integrated Micro Channel Heat Exchanger is made up of numbers of thin metal plates that have no burr and no bumpiness, but the plate is machined with grooves and have a defined structure. Given suitable temperature and pressure in vacuum condition, the plates will be bonded together by some time. After bonded, there are honeycomb sections for liquid of high pressure to flow through without leakage, and the strength of extension will not be lower than the base metal.
The channel equivalent diameter of the microchannel heat exchanger is between 10 μm and 1000 μm. Due to its high compactness, small volume and high compressibility, it is widely used in laser cooling, precision instrument, medical equipment, aerospace and other occasions.
Diffusion bonding process
Shape and structure
Integrated micro-channel heat exchanger – features
① High heat transfer coefficient
Micro-channel heat exchanger, usually for liquid heat exchanging, is made by precision 3D cavity bonding technology, and it has no contact heat resistant, heat transfer coefficient can be as high as 5000-10000W/（m2•K）.
② Filling little refrigerant
Comparing with plate-fin heat exchanger of same capacity, integrated microchannel heat exchanger’s passage volume has been declined by 96%, so there will be less refrigerant to be filled. That not only save running cost, but also make a great contribution to slow down global warming.
③ Compact >
Integrated micro-channel heat exchanger heat exchanging surface can be as high as 2000-3000m2 /m3, which is 6 times that of plate-fin heat exchanger. For one unit, the heat transfer amount of micro-channel heat exchanger .
④ Stand high pressure, anticorrosion
Dimension of integrated microchannel heat exchanger is only a few millimeters. By technology of integrated, the heat exchanger can stand pressure up to 30MPa nearly as same as base material. Because it can stand high temperature, the heat exchanger can be applied for CO2 . When choosing stainless steel as material, this micro-channel heat exchanger will have the ability of corrosion resistance.
⑤ Widely used
Due to its high compactness, small volume and high compressibility, it is widely used in laser cooling, precision instrument, medical equipment, aerospace and other occasions.
|For its excellent heat exchange performance and adaptability, HZSS micro-channel heat exchanger is widely used for:|
|6.Energy (nuclear energy)|
|7.Miniature cold water machine|
Hangzhou Shenshi Energy Conservation Technology Co., Ltd (HZSS) is a leading research & development, manufacturing, sales, and service supplier for heat exchangers, energy conservation products. HZSS is located in Hangzhou city, the east of China,...